Horizontal/Vertical Bandsaw, Moving Handle, 200 ft/min, 1/2 hp Motor
- Versatility and power when cutting in either a horizontal or vertical position
- Heavy-duty 14-gauge steel stand
- Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath
- Handle and wheels for easy movement
- Ball bearing supported blade wheel
- Fully adjustable ball bearing blade guides
Description
Specifications
Amps [Nom]
9/4.5 - Full load amps; 10.1 - Starting amps; 4.9 - Running amps (no load)
Blade Length [Nom]
64 1/2 in
Blade Thickness [Nom]
0.025 in
Blade Width [Nom]
1/2 in
Brand
Jet
Category
Band Saws
Control Type
Toggle on/off switch
Cutting Cap. 2
5 in (Round Stock at 90°); 3 in (Round Stock at 45°); 5 ¾ in x 5 in and 6 in x 2 in (Rectangular Stock at 90°); 4 ½ in x 3 in (Rectangular Stock at 45°)
Drive Gearing
Worm Gearing
Handle Type
Moving Handle (used to relocate machine and not during operation of machine)
Height [Nom]
41.34 in
Length [Nom]
37 in
Linear Speed [Max]
200 ft/min
Linear Speed [Min]
80 ft/min
Type
Horizontal/Vertical Bandsaw
Voltage Type
AC
Voltage [Nom]
115 V
Width [Nom]
17.72 in
Wt.
115 lb
