Description
1.1 General information
Sieve shaker is a state of art equipment which vibrates the sieves in a 3D motion at high frequency to achieve consistent sieving results in short sieving time. With a quick clamp mechanism, the equipment is most suitable for variety of materials from foundry sands to pharmaceutical powders.
1.2 General Usage
Sieve shaker is used for ascertaining the fineness number with help of sieve set. i.e. the grain size fraction of variety of materials from foundry sands (dried and clay free sand) to pharmaceutical powders.
1.3 Product Data
Product Name:
Sieve Shaker
Product Code:
VGH II
Order Reference Code:
V0000009
Electrical Supply Required:
230v 50Hz A.C. (Default)
110v 60 Hz A.C (Optional)
Single Phase, Stabilized with Over/ Under Voltage cut-off.
Electrical Plug:
M type : 15 Amp Plug
Typical Maximum Current:
2.0 A at 230V
Compressed air Supply:
Not Required
Communication:
Not Applicable
Dimensions:
480x340x550 mm (WXBXH)
Packing Dimensions:
610x460x460 mm (WXBXH) Typical
Net Weight:
Approximately 38 kg
Gross Weight:
Approximately 48 kg
Colour:
Factory Default
Measuring Range:
Not Applicable
Traceable to:
Manufacturers Standards
Least Count:
Not Applicable
Specimen Requirements:
Not Required
Operating Temperature:
0-50Â degrees Celsius
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
15500 nos. of Testing Cycles or Once in Year
2.1 Scope of supply
- Sieve Shaker.
- Clamping stud – 02 nos.
- Assy top plate.
- Knob – 02 nos.
- Guide rubber.
- Working condition certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Splitter : To get representative sample
Sieve Set
4.1 Recommended Calibration kits
NA
4.2 Recommended attachments
- NA
4.3 Alternative equipment
- Sieve Shaker VGH III
5.1 Consumables
- Guide Rubber # V9001020
Specifications
IN
Versatile
Sand Testing Equipment
Versatile
Description
1.1 General information
Sieve shaker is a state of art equipment which vibrates the sieves in a 3D motion at high frequency to achieve consistent sieving results in short sieving time. With a quick clamp mechanism, the equipment is most suitable for variety of materials from foundry sands to pharmaceutical powders.
1.2 General Usage
Sieve shaker is used for ascertaining the fineness number with help of sieve set. i.e. the grain size fraction of variety of materials from foundry sands (dried and clay free sand) to pharmaceutical powders.
1.3 Product Data
Product Name:
Sieve Shaker
Product Code:
VGH II
Order Reference Code:
V0000009
Electrical Supply Required:
230v 50Hz A.C. (Default)
110v 60 Hz A.C (Optional)
Single Phase, Stabilized with Over/ Under Voltage cut-off.
Electrical Plug:
M type : 15 Amp Plug
Typical Maximum Current:
2.0 A at 230V
Compressed air Supply:
Not Required
Communication:
Not Applicable
Dimensions:
480x340x550 mm (WXBXH)
Packing Dimensions:
610x460x460 mm (WXBXH) Typical
Net Weight:
Approximately 38 kg
Gross Weight:
Approximately 48 kg
Colour:
Factory Default
Measuring Range:
Not Applicable
Traceable to:
Manufacturers Standards
Least Count:
Not Applicable
Specimen Requirements:
Not Required
Operating Temperature:
0-50Â degrees Celsius
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
15500 nos. of Testing Cycles or Once in Year
2.1 Scope of supply
- Sieve Shaker.
- Clamping stud – 02 nos.
- Assy top plate.
- Knob – 02 nos.
- Guide rubber.
- Working condition certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Splitter : To get representative sample
Sieve Set
4.1 Recommended Calibration kits
NA
4.2 Recommended attachments
- NA
4.3 Alternative equipment
- Sieve Shaker VGH III
5.1 Consumables
- Guide Rubber # V9001020
